- Auto Lighting System[4]
- Auto Sensors[1]
- Car Alarms[6]
- Car Reversing Aid[2]
- Car Freshener[3]
- Other Motorcycle Electrical Systems[6]
- Motorcycle Ignition System[6]
- Other Motorcycle Parts[6]
- Other Auto Parts[2]
- Other Consumer Electronics[1]
- Integrated Circuits[1]
- EL Products[1]
- Electronic Signs[1]
- LED Displays[6]
- Digital & Analog-Digital Clocks[3]
- Other Lights & Lighting Products[6]
- Timers[1]
- Alarm[1]
- Advertising Light Boxes[1]
- Other Telephone Accessories[2]
- Other Mobile Phone Accessories[4]
- Other Marine Supplies[4]
- Special Transportation[1]
- Contact Person : Ms. Liu Suki
- Company Name : Guangzhou Yinghua Electronic Factory
- Tel : 86-20-86600510, 86600926
- Fax : 86-20-86600512
- Address : Guangdong,Guangzhou,No. 243, JiangRen Road, BaiYun District, Guangzhou City, Guangdong Province. China
- Country/Region : China
- Zip : 510450
2011 new design auto radar resister to protect from some forfeit
Related Product Searches:2011 new design auto radar resister to protect from some forfeit,High Quality,auto radar resister, car led light resistance,YHC-007A
car radar resister, car radar detector, car radar sensor.
Features:
When you drive overspeed or run the red light unwittingly, to be taken picture by car radar camera, you have to pay the police penalty and waste your time. If you have a Car Radar Resister, you dont need to pay this money! This device will protect you from Violation Ticket. And also remind you drive complying with the traffic regulation. This device is hidden installed, not easy to be discovered. This device supports continuous flashing, can jam all kinds of digital cameras.
Instruction:
1. Fixed the control box beside the driving seat;
2. Rip off the 3M protect tape on the flash lights, and stick it to the back of license plate,one to front license,another to back license, find a space to pull the cable into the car.
3. Installation of back sensor:
3.1 For Saloon Car: Rip off the surface of Velcro, and stick it on the panel of rear seat.
3.2 For SUV, MPV: Connect the professional bracket with sensor, and then stick the bracket on the back windshield.
3.3 Adjust the angle of the sensor to make it right to the radar camera;
3.4 Pull the sensor cable into the car, where the control box located;
4. Stick the front sensor on driving panel;
3.5 5. Connect the flash lights and sensors cable with the control box; Please connect the sensors to control box with the same colour cable & same colour pin .
3.6 6. Switch on DC12V power, the Red LED indicators on sensor and on auto lighter will be on.
7. 20-30 seconds later, control box will be ready. At this moment, the lighters Red LED will be off, and the Green LED of auto lighter will be on.
8. Press the test button on the sensors, the flash light will flash once, which will make BiBi sound at the same time as a warning tone.
9. When the car is being taken photo by radar camera, the camera will flash, at the same time, the Car
Radar Resister will emit flashing light to the camera and makes BiBi as a warning tone, so that the camera will exposure too much, and the photo bedims; If the Rader Camera is at the front of the car, the back flash light will not flash. Also if the Rader Camera is at the back of the car, the front flash light will not flash.
10. There is a switch on the front sensor.Turning the switch off will cut off the power supply.Then the front flashing light will always not flash.
11. Notice: Safety first. Dont overspeed or run the red light please. car radar resister
2011 new design auto radar resister to protect from some forfeit